Submersible Well Pump Weight: Does It Include the Motor?
The submersible well pump weight on a data sheet may cover only the pump end. For example, Liyuan lists 14.3 kg (31.5 lb) for the 6SG30/6 pump body. Its separate motor table lists 45 kg (99.2 lb) for a 6-inch, 5.5 kW water-cooled motor. If the supplier confirms that combination for your order, the two catalog components add up to 59.3 kg (130.7 lb). That is not the weight of the shipping crate or the load a contractor will lift from the well. PUMP BODY W (kg) None
Which number should you ask for? If you need a spare hydraulic end, ask for pump-body weight. If you need a complete replacement, ask for the net weight of the assembled pump and motor. If you are booking freight, ask for gross weight and dimensions per package. If you are arranging well service, give the contractor the installation record as well as the pump model.
How Much Does a 6-Inch Submersible Well Pump Weigh?
“Six-inch” identifies a size family, not a weight. The examples below use the PUMP BODY W (kg) column in Liyuan’s 6-inch SG pump sheet and the 6-inch, three-phase, water-cooled section of its submersible motor weight table. The final column shows arithmetic, not a factory scale reading or approval of a particular pairing. PUMP BODY W (kg) None
| Liyuan pump end | Catalog motor power | Pump body only | Water-cooled motor at that power | Sum of the two figures |
|---|---|---|---|---|
| 6SG30/6 | 5.5 kW | 14.3 kg | 45 kg | 59.3 kg |
| 6SG30/8 | 7.5 kW | 17.9 kg | 49 kg | 66.9 kg |
| 6SG30/19 | 18.5 kW | 37.7 kg | 74 kg | 111.7 kg |
| 6SG30/21 | 18.5 kW | 41.3 kg | 74 kg | 115.3 kg |
The last two rows explain why even a clear motor nameplate leaves part of the question unanswered. Both pump ends call for 18.5 kW (25 hp), but the /21 body weighs 3.6 kg more than the /19. Their body lengths also differ: 2,282 mm versus 2,090 mm. If a distributor orders a spare using only “6-inch, 25 hp,” the description fits both models. Submersible Pump and Deep Well Pump
Liyuan 2026 catalog, printed page 13, excerpt. Read the model on the left and the weight heading on the far right. The adjacent length column also refers to the pump body, not the complete motor-pump assembly.
How Do I Know Whether a Pump Quote Includes the Motor?
Read the description of the item for sale, not just the power column. The 6SG30/6 line gives a motor power of 5.5 kW because a buyer needs that figure to select a motor. The same line labels 14.3 kg as pump-body weight. Having a motor rating on the page does not put a motor in the box. PUMP BODY W (kg) None
Ask the supplier to complete this sentence: “The quoted price and net weight cover ______.” “One 6SG30/6 hydraulic end, without motor” answers it. So does “one assembled set with the following motor model and lead.” “One 5.5 kW submersible pump” does not. A photo of an assembled pump cannot settle what the offer includes.
If you plan to keep an existing motor, send both nameplates before ordering the spare. Ask the supplier to confirm the mounting interface, shaft coupling, speed and permissible thrust. If you need a complete set, ask for its assembled length and maximum outside diameter with the cable guard. Do not use the 842 mm pump-body length to decide whether the complete 6SG30/6 assembly will clear a restricted opening. PUMP BODY W (kg) None
Which Weight Should I Give the Freight Forwarder?
Give the forwarder the outside dimensions and gross weight of each finished package. Net equipment weight leaves out the crate, skid and blocking. A motor, pump end and cable reel may travel as separate pieces. Ask for the package count rather than assuming that one pump set means one crate. assets.ups.com
Consider an order for five 6SG30/6 sets. If the supplier confirms the 45 kg motors in the example above:
- Five pump ends: 5 × 14.3 = 71.5 kg
- Five motors: 5 × 45 = 225 kg
- Component subtotal before separate accessories or packing: 296.5 kg
A freight inquiry based on 71.5 kg would omit all five motors. An inquiry based on 296.5 kg would still lack the final package weights and dimensions. Ask for estimated packing details when comparing offers, then obtain the actual packing list before dispatch.
This distinction also matters for a single urgent spare. A long, light pump end can occupy more freight space than its scale weight suggests. For example, DHL explains actual and dimensional weight for its US eCommerce packages. Ask your own carrier which rule applies to your service; do not use a parcel formula to price a crated export shipment. United States of America
Why Can the Load at the Well Be Much Higher Than the Pump Weight?
The crew does not retrieve an unpacked pump from a warehouse floor. Depending on the installation and the stage of removal, the suspended equipment can include drop pipe, retained water, power cable, couplings and check valves. An irrigation-well owner on AgTalk described the practical difference: lowering an empty line had felt straightforward; retrieving it with water still inside was a different job. talk.newagtalk.com
Here is an example of one omitted item, not a lifting calculation. Suppose a 100 m length of pipe has an actual inside diameter of 75 mm and remains full of fresh water:
Water volume = π × (0.075 m ÷ 2)² × 100 m ≈ 0.442 m³
That is about 442 litres, or 442 kg of water, before counting the pipe itself. The calculation uses the pipe’s internal bore, not its nominal trade size or the diameter stamped on the pump outlet. If the pipe drains or only part of it remains suspended, the relevant quantity changes.
Do not add 442 kg to a catalog subtotal and use the result to select a hoist. Buoyancy changes as equipment leaves the water, and a stuck assembly can require force that a static weight estimate does not predict. The Peerless submersible pump manual, Tables 2–4, illustrates why manufacturers account separately for pipe, water, motor and pump components. Its model weights are not Liyuan ratings. 2649804 BEG.doc
Give a qualified well contractor the pump setting depth, pipe type and size, coupling details, valve locations and any history of binding. Ask the contractor to assess the site and specify rated lifting equipment. Never use the electrical cable as a lifting line. If you are also changing the riser, check drop-pipe diameter, pressure and tensile limits; a pressure rating does not tell you how much a threaded joint can support. Liyuan Pump
What If Two Suppliers List Different Weights for the Same Pump?
First check whether they are weighing the same thing. A factory may list a hydraulic end, a distributor may price it with a locally sourced motor, and a forwarder may report a pallet weight. All three numbers can be correct. Put the exact pump model, motor model, quantity, net or gross basis, and included accessories beside each figure before treating the difference as a product defect.
If those details match and the figures still differ, ask for a dated drawing or written weight confirmation for the current build. For freight, request the packing list for the actual shipment. Do not choose the smaller number because it reduces your freight estimate, or the larger number because you expect a heavier unit to last longer. Neither number establishes what the pump will deliver at your required flow and head.
What Should I Ask Liyuan to Put on the Quotation?
Tell the factory who needs the number and what decision it will support. A spare-parts buyer, a forwarder and a well contractor need different information. For a pump order, you can send Liyuan Pump this request:
Please quote one 6SG30/6 hydraulic end separately and one complete motor-pump set for comparison. Identify the proposed motor and confirm whether it suits our duty point and supply. For each option, state the net equipment weight and what it includes. For freight, show the number of packages, estimated gross weight and outside dimensions of each package. Please mark estimates and confirm the final figures on the packing list.
Attach the existing pump and motor labels for a replacement, or give the required flow, head, voltage, phase and frequency for a new well. Before approving the order, you should have a net weight for the item you are buying, a gross weight for each package you are shipping, and a separate site assessment for the equipment you are lifting.
Email:Liyuan@liyuan-pump.com
WhatsApp:+86 181-2828-2767
