Three Phase Pump Control Panel: 11–18.5 kW

Table of Contents

Three Phase Pump Control Panel

Three Phase Pump Control Panel: Can M3 Control An 11, 15 Or 18.5 kW Pump?

Liyuan’s 2026 catalog lists M3 three phase pump control panel configurations for 11, 15 and 18.5 kW motors at a rated 380 V three-phase supply. To order the right panel, the motor power is only the first check: confirm the exact panel configuration, motor nameplate current and required control method with the supplier.

This distinction matters when an existing pump is being automated or a buyer is moving from a smaller control box to a larger borehole pump.

Which Three Phase Pump Control Panel Matches Your Motor?

Pump Motor Rating2026 Catalog ListingBuyer’s Next Check
11 kW / 15 HPM3-D1C/KConfirm current range and exact configuration
15 kW / 20 HPM3-D1C/KConfirm current range and exact configuration
18.5 kW / 25 HPM3-D1C/KConfirm current range and exact configuration
22 kW / 30 HPNot listed on this M3 catalog pageRequest a suitable alternative; do not assume the 18.5 kW unit is adequate

Source: Liyuan Pump 2026 catalog, PDF page 22, printed page 19. The page lists 380 V, three-phase, 50/60 Hz and an IP54 protection grade. Ratings refer to catalog configurations; they do not mean one individual box can serve every motor in the table.

Model-label caution: an older Liyuan catalog labels the 15 and 18.5 kW rows M3-D2C/K. Confirm the current model code and nameplate for the exact unit before purchase.

Can A 15 kW Pump Use An 18.5 kW Control Panel?

A higher listed power does not automatically establish a correct match. The panel’s motor-current range and protection settings must cover the 15 kW motor’s actual nameplate current, and its starting arrangement must be compatible.

The Liyuan catalog page does not provide the M3’s current ranges or setting instructions. Ask for the exact configuration’s data sheet and wiring manual before approving a larger-rated panel for a smaller motor.

For context, Pedrollo’s QST panel data sheet also instructs buyers to check motor rated current when matching a pump and panel. Its current figures apply to Pedrollo equipment, not to Liyuan M3.pedrollo.com

What Does The M3 Pump Control Panel Protect Against?

Liyuan’s catalog lists the following protection functions for the M3 series:

  • Overload.
  • Under- and overvoltage.
  • Motor stall.
  • Sensor-free dry running.
  • Open phase.

The catalog also lists manual and automatic control, push-button calibration and an English LCD display. Ask for the manual to confirm setup, trip thresholds, delays and which functions apply to the exact delivered version.

Open-phase protection should not be described as proof of phase-reversal or phase-imbalance protection. Those functions are not established by this catalog page.

Does Sensor-Free Dry-Run Protection Fill The Tank Automatically?

No. Dry-run protection and tank-level control answer different questions.

Sensor-free dry-run protection is listed as a pump-protection feature. For automatic tank filling, the catalog separately lists control inputs including a float switch or pulse electrode probe. It also lists pressure-switch and electric-contact pressure-gauge control.

Before ordering, tell the supplier whether the system needs to stop when a destination tank is full, respond to pressure, or use another control arrangement. Confirm the required accessories, sensor locations, input compatibility and wiring for the quoted configuration.

The catalog does not explain the sensor-free detection algorithm or its trip settings. Do not assume it detects every no-flow condition or replaces all other required safeguards.

What Can The Last Five Fault Records Tell You?

The M3 catalog lists a display of the last five pump fault records and accumulated pump running time. This can help a technician discuss repeated interruptions with the supplier.

For example, if a pump stops repeatedly while filling a tank, record the display and operating conditions before resetting. A dry-run indication, overload indication or voltage fault calls for a different investigation; the indication alone does not prove the underlying cause.

Provide:

  • A clear photograph of the displayed fault and panel nameplate.
  • The motor nameplate and the approximate time or operating stage when the trip occurred.
  • Whether the pump was starting, running or filling the tank.
  • Relevant water-level and supply information available to the technician.

Do not repeatedly reset or bypass a protective device. A qualified technician should investigate and perform electrical measurements safely. For a broader diagnostic checklist, see submersible pump overload protection.

Does IP54 Mean The Panel Can Be Installed Anywhere Outdoors?

No. The catalog states IP54, but that rating alone does not establish suitability for immersion, direct water jets, condensation, intense sun or every outdoor location.

Confirm the manufacturer’s mounting instructions and environmental limits for the exact unit. Check cable-entry sealing, weather exposure and any additional enclosure needed for the site.

What Should You Confirm Before Ordering An M3 Control Panel?

Send Liyuan Pump the motor nameplate and specify:

  1. Motor power and rated current.
  2. Supply voltage, phase and frequency.
  3. Pump model and proposed starting method.
  4. Tank-level or pressure-control requirement.
  5. Site conditions and installation location.
  6. Whether any existing starter, sensors or protective devices must be reused.

Request the exact M3 model and power configuration, current range, wiring diagram, accessories list and instructions for calibration and protection settings.

A suitable three phase pump control panel is not just a kW match. It must match the motor current and the way the pumping system needs to start, stop and respond to faults.

Email:Liyuan@liyuan-pump.com

WhatsApp:+86 181-2828-2767

Phone: USA 86-134 2250 1007

General Questions
Quotes, Please use Sales Quote Form HERE Email: liyuan@liyuan-pump.com
Quick Connect
Scroll to Top

Get a Quote