WLD280 Solar Pump Inverter: PV And Motor Matching

Table of Contents

WLD280 Solar Pump Inverter

WLD280 Solar Pump Inverter: Will It Match Your Panels And Pump?

The WLD280 solar pump inverter needs two separate matches: the photovoltaic array must meet its DC input requirements, and the drive output must suit the pump motor. Matching the motor’s kW rating alone does not confirm either.

Liyuan’s supplied control-box catalog lists a recommended DC input range of 420–720 V, a recommended working voltage of 540 V, and a maximum DC input voltage of 800 V. These are different limits—not three alternative settings for the same purpose.

Which WLD280 Solar Pump Inverter Ratings Matter?

Catalog SpecificationListed ValueWhat To Check
Recommended DC input range420–720 V DCArray operating voltage under expected conditions
Recommended working voltage540 V DCA design reference, not a universal string size
Maximum DC input voltage800 V DCHighest temperature-corrected array open-circuit voltage
Rated output voltageThree-phase 380 V ACMotor voltage and connection
Product-range motor power0.75–200 kWExact model and output-current capability
Cooling methodAir coolingEnclosure ventilation and ambient conditions

The catalog also lists a three-phase 380 V AC input option. Confirm the approved supply-selection arrangement; do not assume PV and utility power can simply be connected together.

The 420–720 V figure is described as a recommended input range. The brochure does not separately define every startup, shutdown and MPPT operating threshold. Request the model-specific manual when designing the array.

How Many Solar Panels Can You Connect In Series?

Panel wattage alone cannot answer this question.

Two modules with the same wattage can have different operating voltages and open-circuit voltages. Request the module datasheet showing Vmp, Voc, Imp, Isc and voltage-temperature coefficients.

Consider this simplified example, not an installation recommendation:

  • Module Vmp at standard test conditions: 41 V.
  • Module Voc at standard test conditions: 49 V.
  • Number of modules in series: 13.

The preliminary string values are:

Operating voltage: 13 × 41 = 533 V

Open-circuit voltage: 13 × 49 = 637 V

Although 533 V is close to the catalog’s 540 V reference, this does not approve the design. The engineer must still check cold-weather Voc, hot-weather operating voltage, startup behavior and the required motor output.

SMA’s PV input requirements explicitly require array open-circuit voltage on the coldest design day not to exceed the inverter’s maximum input voltage. The principle explains the cold-weather check; SMA’s product-specific ratings do not apply to WLD280. manuals.sma.de

Do not design a string to reach 800 V under normal conditions. It is the catalog’s maximum input value, not the recommended working target.

Can You Add Parallel Strings To Get More Pumping Power?

Parallel strings increase available array current. They do not solve insufficient string voltage.

Before adding strings, obtain the selected WLD280 model’s maximum permitted PV input current, short-circuit-current limit and allowable array-power specification. The brochure’s “rated input current” column does not clearly identify a PV short-circuit rating and should not be used as one.

Grundfos’s explanation of solar-panel connections distinguishes the voltage increase from series connection and the current increase from parallel strings. Grundfos

More installed panel wattage also does not guarantee a fixed daily water volume. The assessment must include local solar conditions, seasonal pumping head, pump performance and daily water demand.

Is A 7.5 kW WLD280 Suitable For Every 7.5 kW Motor?

No. Compare output current as well as power.

Selected entries from Liyuan’s catalog are:

Inverter ModelListed PowerRated Output Current
WLD280-40054 kW9.5 A
WLD280-40075.5 kW14.0 A
WLD280-40107.5 kW18.5 A
WLD280-401511 kW25.0 A
WLD280-402015 kW32.0 A

For example, if the selected motor requires 19 A at its specified duty, the WLD280-4010’s listed 18.5 A output is not a confirmed continuous-current match—even though both products carry a 7.5 kW label.

Request a selection accounting for actual motor current, duty and any derating. Do not increase current limits merely to avoid selecting an appropriately rated drive.

The VFD selection article for submersible pumps covers additional motor checks, including cable length, output filtering and minimum cooling speed. The inverter’s broad output-frequency capability is not permission to overspeed the pump.

Does WLD280 Automatically Switch To Grid Or Generator Power?

The catalog describes independent selection of photovoltaic and utility power, and its system illustration includes a DC/AC switching box.

That does not establish seamless transfer, simultaneous power blending or automatic generator starting.

Specify the behavior you need:

  • Solar-only operation with reduced pumping during weak sunlight.
  • Manually selected backup power.
  • Automatic transfer to an approved alternative supply.

Ask for the corresponding wiring diagram, source interlocks and restart sequence. The quotation should identify whether the switching equipment is included or separate.

The brochure also lists water-level control and water-shortage protection. Confirm the sensors supplied, stop/restart levels and dry-run recovery logic rather than assuming the illustrated accessories are included.

What Must Be Confirmed Before Installation?

The catalog calls for protection from rain, damp conditions and direct sunlight. It states derating above 40°C ambient temperature and above 1,000 m altitude, but does not provide the derating curves.

A hot outdoor cabinet can therefore change the usable drive rating. Request enclosure and ventilation requirements for the actual installation site.

For a WLD280 solar pump inverter quotation, send:

  • Motor nameplate and pump model.
  • Required flow, head and daily water volume.
  • PV module datasheet and proposed string arrangement.
  • Site location, temperature extremes and altitude.
  • Motor-cable length and existing controls.
  • Backup-power and water-level-control requirements.

Email Liyuan Pump for a confirmed inverter model, array limits and system wiring proposal. Have a qualified solar/electrical installer complete the design and commissioning; the catalog comparison is not a high-voltage wiring instruction.

Email:Liyuan@liyuan-pump.com

WhatsApp:+86 181-2828-2767

Phone: USA 86-134 2250 1007

General Questions
Quotes, Please use Sales Quote Form HERE Email: liyuan@liyuan-pump.com
Quick Connect
Scroll to Top

Get a Quote